On this job we were hired to update a basement in Millbrook. We painted the walls and trim, patched some of the paneling, replaced a few outlets, installed new bi-fold doors on the utility room entrance, ran new baseboards and installed LVP flooring throughout.
For this job in Bucks we completely tore down an old laundry room and remodeled it to a brand new modern look with a quartz countertop, marble backsplash, undermounted sink and cabinets. We first had to temporarily add plumbing into the garage for usage of the washer and dryer while…
For this job we installed a bump out shiplap wall in a basement. We cut the drywall out and framed the bump out, re-drywalled, and installed the mitered shiplap with a fireplace cutout and mounted the tv back.
In Warminster we were hired to complete remodel a sixty year old den which was covered in old panelling and carpet. Here’s a general list of what we did:
This project was a big one and completely custom to the customers needs. This bedroom was on the same level as the attic so the customer wanted to use some of the attic space to expand the room and include recessed areas of the room within the previous attic space…
For this job in Bustleton we had a lot of renovating to do on the second floor, in the three bedrooms and hallway, of a townhouse. First we had to paint the bedrooms and hallway, entry and closet doors. Then we had to rip up all the carpet and in…
For this job we added a mitered shiplap bump out wall in the living room. First we had to measure the right width, far enough from the stairs but wide enough for the TV and fireplaces. Once we had the right lines we cut the drywall, crown and baseboard out…
In Warminster we were hired to renovate a porch room in the backyard. We replaced the concrete ledges with PVC while adding verticle PVC beadboards. We hung a TV and wired in an exterior ceiling fan. On the outside of the porch room, we raised the height of the two…
On this job we were brought in by the homeowners after her new shower was just upgraded. She hired us to install a new vanity, light, mirror, toilet and LVP flooring.
During this job we had to route Romex electrical wire through a new light switch in the basement through the rim joist of the house into the soffit above the garage. We then cut two holes above the garage into the soffit and fished romex thru the soffit and installed…