Mini Shed Assembly
For this job we simply assembled a mini shed for a customer.

For this job we simply assembled a mini shed for a customer.

For this job we actually travelled to Easton to complete 3 different trim jobs for a customer. In the living room we installed vertical wood slats even spaced. In the middle bedroom we installed a shiplap wall. And in the half bathroom we installed panelling on the ceiling and back…

On this job we grinded and painted front door stairs and landing.

This was a small job where the customer just needed us to sand down, fill and paint all the chips around their front door. I also offered to replace part of the rotted wood brick mold for new PVC brick mold, which we did.

For this job we added a mitered shiplap bump out wall in the living room. First we had to measure the right width, far enough from the stairs but wide enough for the TV and fireplaces. Once we had the right lines we cut the drywall, crown and baseboard out…

In Warminster we were hired to renovate a porch room in the backyard. We replaced the concrete ledges with PVC while adding verticle PVC beadboards. We hung a TV and wired in an exterior ceiling fan. On the outside of the porch room, we raised the height of the two…

For this small job in Millbrook we were hired to upgrade the look of the plywood around the skylight, to paint the ceiling and to add crown molding.

On this job we had to replacement a thrown together closet with new bypass doors. We had to reframe the closet a bit, cut the doors down to a height that would fit, install and paint them.

Here we sanded and painted the stairs while then installing a stair runner.

For this job we placed an original stair and hallway iron railing with a modern horizontal iron bar balusters. We replaced the post with three poplar posts wrapped in finish trim at the bottom and stained.